MUR: Modular Upper Receiver

MUR: Modular Upper Receiver

MUR: Modular Upper Receiver
SKU: N/A
5 out of 5 based on 5 customer ratings
(5 customer reviews)

From: $179.95

The MUR is a rigid Mil-Spec flat-top upper made to fit all AR15/M16 M4 rifles and carbines. The MUR was developed to give the customer a Mil-Spec correct upper receiver with a thicker wall, making the MUR upper receiver a stronger platform. This more rigid upper receiver will increase accuracy and reliability, while extending the life of the interfacing components. The MUR-1A model comes equipped with a shell deflector and forward assist. The MUR-1S comes with a one piece machined shell deflector unit which was updated to this piece in June of 2015.

AVAILABLE OPTIONS:
Clear Selection
  • Aircraft-grade aluminum construction
  • 7075 Forging
  • Stress relieved, heat treated, aged twice and cryogenic treated
  • Hard coat anodized, black per MIL-A-8625 TYPE III Class 2
  • Precision machined and finished by hand
  • Bore coated with dry film lube over the anodized surface
  • Compatible with all Mil-Spec AR-15 parts and accessories
  • Available with (MUR-1A) or without forward assist (MUR-1S)
  • M4 feed ramps

AVAILABLE IN THE FOLLOWING COLORS:
FDE/Tan:
Foliage Green:
Black:
  • Weight: MUR-1A- 9.80 oz , MUR-1S- 8.70 oz
  • Length: 7.657 inches
  • Height overall: 2.121 inches

1. What kind of mounting block should I use?

We recommend that you use the Geissele Reaction Rod for installation. Damage could incur if you use clamp style mounting blocks or blocks that do not support the upper internally. This could void your warranty.

http://geissele.com/reaction-rod.html

2. How do you remove the forward assist to install a custom dust cover?

Due to our Lifetime Warranty, we advise that you not remove or attempt to remove your forward assist. Our Lifetime Warranty covers all of our products as long as they are not modified in any way (i.e. disassembly, Cerakote, painted, Durakote, etc.). We do offer a service in house that will maintain your Lifetime Warranty. Please contact us to arrange this service.

3. Is your upper forged or billet?

All of our uppers are made from forgings.

4. Do you make a MUR that is compatible with .308?

We do not current have a .308 compatible MUR available; however, our Research and Development team is exploring this area.

5. What type of coating is applied to the MUR-1A-T Tan MUR? 

We use KG Industries GunKote FDE on these uppers.

VLTOR GALLERY

Customer Reviews

5 reviews for MUR: Modular Upper Receiver

  1. 5 out of 5

    :

    I just purchased this “MUR” upper receiver and I am very impressed with the attention to detail in its manufacturing. The fit on my “Colt” lower is perfect and the finish is flawless. This will be used in fitting up an upper with a “Wilson Combat” match grade barrel. From my initial impression, I expect to get great groups from my rifle when it is complete. Thanks for providing such a fine upper receiver.
    Neale
    Hampstead, Maryland

  2. 5 out of 5

    :

    I have 2 MUR uppers and they both fit very tight on my duty rifle(Colt) and both of my person Sig M400 and Sig 516. Zero slop and very minimal gap between receivers. A little pricey, but very well worth it. Awesome stuff, very well built and engineered.

  3. 5 out of 5

    :

    I built my AR so I would fully understand these guns. A friend recommended that I use the MUR upper receiver, It fits very snug with no slop at all and is very well made. Another buddy bought a very well known expensive AR and it is lose between the upper and lower to the point that this relative newb wasn’t impressed at all. I would recommend this upper to anyone that asks, in fact I will be getting another for my next build.

  4. 5 out of 5

    :

    Great product! Perfect fit and finish and 100% reliability. I have this receiver with mated with a BCM 16″ SS410 1/8 twist barrel and lower with a DD bcg. The MUR is a great piece for my system. It allows me to consistently shoot 3/4″, 5 shot groups at 100yds with match ammo.

  5. 5 out of 5

    :

    Just received my 3rd MUR for a MK12 build. It fits tight to all 4 of my lowers and the barrel fits snug as well. VLTOR is great quality stuff.

Add a review