AR

ALL AR

Showing 1–15 of 36 results

  • AEBK-A5_buffer_kit_3

    AEBK-A5: VLTOR A5 Stock Combo Kit

    The VLTOR A5 Stock Combo Kit is not just an EMOD stock with M4 components; it was developed as a completely new operating system. Specifically developed on the request of the USMC, the A5 combo kit is considered to be the most innovative upgrade for the AR platform, increasing ...

  • ARM_01

    ARM: Rifle Stock

    The ARM rifle stock is a dual-purpose stock system which mounts to either a carbine collapsible receiver extension (Mil-Spec only) or a rifle length receiver extension. The ARM stock is simple to install and enhances the look of the weapon, giving it a continuous smooth look.

  • bcm_ambi

    BCM-GFH: VLTOR/BCM Gunfighter Charging Handle

    The BCM Gunfighter charging handle and extended latches feature internal redesigns to direct the force off of the roll pin and into the body of the charging handle during support hand only manipulations. This new design makes the charging handle stronger and less prone to lat ...

    VIEW ITEM
    From: $52.95 Select options
  • EMOD_01

    EMOD: Enhanced Modular Stock

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull. The EMOD is slightly wider and longer at the toe than a re ...

    VIEW ITEM
    From: $114.95 Select options
  • gb_clamp

    GB: Clamp On & Set Screw

    Built to the tightest tolerances, the VLTOR low profile, clamp on and set screw gas blocks are small enough to fit inside most rail systems. These gas blocks were designed to be used when a rail system/handguard that is mounted over the entire gas system.

    VIEW ITEM
    From: $58.95 Select options
  • IMOD_01

    IMOD: Improved Modular Stock

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands. The IMOD stock kit is the perf ...

    VIEW ITEM
    From: $89.95 Select options
  • KM-QDL and KM-QDF

    KM-QD: VLTOR KeyMod™ QD Sling Mounts

     VLTOR KeyMod™ Sling Mounts are available in either Free-Rotation or Anti-Rotation. These mount securely to all standard KeyMod™ mounting systems.

    VIEW ITEM
    From: $17.95 Select options
  • MP-1-001

    MP-1: VLTOR Modpod

    The Modpod is a bipod assembly that mounts to the side of railed forends. The individual bipod leg attaches to the side rails, allowing the user to have an unobstructed lower rail, where most bipods normally mount.

  • mur-1a copy

    MUR: Modular Upper Receiver

    The MUR is a rigid Mil-Spec flat-top upper made to fit all AR15/M16 M4 rifles and carbines. The MUR was developed to give the customer a Mil-Spec correct upper receiver with a thicker wall, making the MUR upper receiver a stronger platform. This more rigid upper receiver will ...

    VIEW ITEM
    From: $179.95 Select options
  • Pistol A5 Kit

    Pistol-A5: The VLTOR A5 Pistol Kit

    Released for 2015, you can now convert your AR pistol to the patented VLTOR A5 system! The A5 system is considered to be the most innovated upgrade for the AR platform, increasing the reliability and performance of any weapon. It is proven in reducing the cyclic rate of M4 car ...

  • re-1

    RE-1: AR-15

    The RE-1 receiver extension allows you to mount a Mil-Spec stock on a civilian carbine or convert your A2 style fixed buttstock to a collapsible configuration. This receiver extension has five positions and corresponding white position numbers that are visible through the witn ...

  • re-10_re-1

    RE-10/A5SR: A5 Receiver Extension

    The RE-10/A5SR Receiver Extension is a six position receiver extension designed to work with the VLTOR A5 system. This receiver extension is designed to work with Mil-Spec dimensioned M4/AR-15 type collapsible stocks. It also can be utilized as a replacement receiver extension ...

  • RE-2

    RE-2: Compartment Receiver Extension

    The RE-2 Compartment Receiver Extension is specifically made for weapon adaptors that accept an AR-15/M4 type receiver extension. By installing this adaptor, you will be able to install most any Mil-Spec dimensioned M4/AR-15 type buttstocks.

  • RE-A5

    RE-A5: A5 Receiver Extension

    The RE-A5 Receiver Extension is a seven position receiver extension designed to work with the VLTOR A5 system. This receiver extension is slightly longer than the traditional M4 receiver extension and is designed to work with Mil-Spec dimensioned M4/AR-15 type collapsible stoc ...

  • RE-PA5

    RE-PA5: VLTOR A5 Pistol Tube

    Released for 2015, you can now convert your AR pistol to the patented VLTOR A5 system! The A5 system is considered to be the most innovated upgrade for the AR platform, increasing the reliability and performance of any weapon. It is proven in reducing the cyclic rate of M4 car ...

DEALERS & DISTRIBUTORS

CATALOG 2017

VLTOR 2017 CATALOG

At VLTOR we believe in providing high quality, innovative solutions that are manufactured in the United States of America. Our products are manufactured in an ISO certified environment and are held to the highest standards of quality.